A Pump.fun volume bot buys and sells a Pump.fun token from many separate wallets so the coin page shows steady trades, a growing list of makers and holders, and real SOL volume. SolanaVolumeBot runs it on the bonding curve and keeps going on PumpSwap after the token graduates. Because Pump.fun also has a reply thread, favorites and creator profiles, a Pump.fun session can add comments, favorites and follows from the same wallets.
Pump.fun volume bot in short
- Works before graduation on the Pump.fun bonding curve and after it on PumpSwap, inside one session.
- Comments, favorites and creator follows are available only for Pump.fun tokens.
- Sessions use 500 to 10,000 fresh wallets, so the maker count grows with the volume.
- Flat 1% of target volume from 100 SOL (1 SOL); creator follows add 4% to 40% of that fee.
- No guaranteed trending slot or King of the Hill, no price promise, and the fee is not refundable.
What does a Pump.fun volume bot change on the coin page?
A Pump.fun volume bot changes the cues a visitor checks first. The trades list fills with buys and sells from different wallets, the bonding curve progress bar moves, holders appear, and with engagement switched on the reply thread gains conversation and the creator profile gains followers. The chart stops looking abandoned in the minutes when attention is highest.
Someone landing on a new Pump.fun coin decides within seconds whether to look closer. A token with a flat chart, an empty thread and three holders reads as dead even if it launched ten minutes ago. A session touches almost every one of those signals at once, which is what separates a Pump.fun session from a generic Solana volume bot run on a DEX pool.
Does the Pump.fun volume bot work before and after graduation?
Yes. Every Pump.fun token starts on a bonding curve, where price is set by how much of the curve has been bought rather than by a liquidity pool. When the curve completes, the token graduates and trading moves to a PumpSwap pool. The mint stays the same; the program that orders go to changes.
SolanaVolumeBot watches the curve while the session runs and, at graduation, sends the remaining orders to the new PumpSwap pool without a restart or a second payment. A token that graduated earlier can be used as well: the console detects that from the mint and routes to the pool from the first order.
| Stage | Where orders go | What to adjust |
|---|---|---|
| Fresh launch | Pump.fun bonding curve | Keep the band tight; small orders already move the curve |
| Near graduation | Pump.fun bonding curve | Steady flow matters more than order size |
| Graduated | PumpSwap pool | Size orders against pool depth; slippage is paid on both legs |
Pump.fun trending and King of the Hill
Pump.fun surfaces tokens in several places: the front page lists, the King of the Hill slot for the coin closest to graduating, and trending views that react to recent activity. The exact formulas are not published and change over time, and King of the Hill is tied to how far a coin has moved along its bonding curve rather than to volume alone.
A Pump.fun volume bot raises the inputs these views can measure: recent trades, distinct makers, holder growth and, with engagement on, replies. It cannot choose the outcome, because every slot is a comparison with whatever else launched in the same window. Treat any service that promises King of the Hill or a trending spot as overselling. What you can plan is timing: run the session when your own audience is about to look.
Pump.fun bump bot vs volume bot
A Pump.fun bump bot places small, repeated buys, often from one or a few wallets, to keep a coin near the top of lists sorted by recent activity. A volume bot does the same job with more depth: it spreads buys and sells across hundreds of fresh wallets, so the recent-activity signal comes with real volume and a rising maker count instead of the same address appearing over and over.
| Tool | What it moves | Typical weakness |
|---|---|---|
| Bump bot | Recent-trade position on activity-sorted lists | Very few makers; tiny orders are easy to spot |
| Comment bot | Reply count on the coin thread | No trading activity behind the replies |
| Holder bot | Holder count | No ongoing volume |
| Volume bot session | Volume, trades, makers, holders; replies and follows if enabled | Costs more per session; still needs real buyers |
The Pump.fun comment bot, favorites and follows
The engagement layer is the reason Pump.fun gets its own page. It works because Pump.fun has a reply thread on every coin, a favorites feature and creator profiles that can be followed. Bonk.fun, Raydium LaunchLab, Jupiter Studio, Believe and Bags have nowhere to post them, so the console locks those switches for their tokens.
Comments
Wallets that traded post short replies on the coin thread. Lines come from a shuffled library in eight languages or from a .txt file you upload. Density is a percentage of orders, spread across the session rather than posted all at once.
Favorites
A share of the session wallets add the token to their favorites. You pick the share, and favorites land gradually while trades run.
Creator follows
Buying wallets can follow the creator profile, so followers grow with holders. This is the one option priced as an add-on: 4% to 40% of the base fee depending on density, shown before you pay.
Keep engagement in proportion. Forty replies under a coin with six holders looks stranger than an empty thread. Moderate comment density, favorites that follow the wallet count and follows only when the creator identity is worth following usually read best.
How to run a Pump.fun volume bot session
Running a Pump.fun volume bot session takes a few minutes: paste the mint, pick a preset, adjust wallets, band and duration, switch on the engagement you want and send the fee. Orders start on the bonding curve or PumpSwap as soon as the payment confirms.
Paste the Pump.fun contract address
Open the console and paste the mint. The token card shows name, ticker, logo and a pump.fun label once it is recognised.
Pick a preset
Launch burst for the first hour, steady climb for a longer build, stealth ladder for small quiet orders, or whale cycle for fewer, larger prints.
Set wallets, band and duration
Raise wallets for more makers rather than raising the order size. Presets set the buy share between 58 and 68 percent, which builds activity without spending the budget on price.
Switch on engagement and pay
Choose comment, favorite and follow density, check the fee in the summary and send it to the deposit address. The console confirms the payment on-chain.
How many makers and wallets does a Pump.fun session need?
Target volume is the number of wallets multiplied by the average order size. The 100 SOL minimum with a 0.1 to 0.3 SOL band is about 500 wallets, and every wallet that trades becomes a maker. There is no published maker threshold for Pump.fun or DexScreener; what helps is a maker count that keeps rising through the session.
- Launch window. A dense 30 to 60 minute run with small orders puts activity on the page while the coin is newest.
- Build-up. Several hours with 1,000 or more wallets keeps the trades list moving while holders accumulate.
- Graduation run. Start as the curve nears completion so activity carries through the switch to PumpSwap.
- Post-graduation. On PumpSwap keep orders small relative to pool depth.
How much does a Pump.fun volume bot cost?
A flat 1% of target volume: 1 SOL for 100 SOL, 5 SOL for 500 SOL, 10 SOL for 1,000 SOL. Transaction fees, priority fees, Jito tips and wallet funding come out of that fee, and comments and favorites are included. Creator follows add 4% to 40% of the base fee. The trading wallets belong to the session and are funded from the fee, so there is no leftover SOL to return, and the fee is not refundable. The pricing calculator shows any size.
Where can you verify the trades?
Session orders are ordinary swaps, so they appear wherever the token is indexed: the trades tab on the Pump.fun coin page, DexScreener, Birdeye, GMGN and Solscan, where each order opens by its transaction signature. Replies show on the coin thread and follows on the creator profile.
Limits, detection and legality
A Pump.fun volume bot does not guarantee a front-page, trending or King of the Hill slot, and it does not hold the price up once the session ends. Randomized funding, block spacing and rotating routes make the wallets harder to cluster on bubble maps, not impossible. Engineered trading volume may be treated as market manipulation in some jurisdictions; check the rules that apply to you. The full list is on the Solana volume bot page.
Questions people actually ask
Does the Pump.fun volume bot work before graduation?
Yes. Orders go to the Pump.fun bonding curve until it completes, then to the PumpSwap pool, inside the same session.
Can a Pump.fun volume bot get my coin to King of the Hill?
It cannot guarantee it. King of the Hill follows bonding-curve progress compared with other coins at that moment. A session adds trades, makers and holders, which can help a coin move along the curve, but the slot depends on the competition.
Is a Pump.fun volume bot the same as a sniper bot?
No. A sniper bot tries to buy a new token in its first blocks to profit from it. A volume bot trades an existing token from many wallets to create visible activity and ends close to flat.
Can I use it on a coin I did not create?
Yes. Any public Pump.fun contract address works. Creator follows point at whoever created the coin.
Can I upload my own comments?
Yes. The console accepts a .txt file with one comment per line, up to 512 KB. It is read in your browser and replaces the built-in library for that session.
What happens to leftover SOL?
The trading wallets are funded from the session fee and emptied by the engine when the session ends. Nothing is sent back to your wallet, and the fee is not refundable.
Why are comments locked on my Bonk.fun or Bags token?
Those launchpads have no reply thread, favorites or follow feature. The console checks whether the mint is a Pump.fun token and locks the engagement options otherwise so you are never charged for something that cannot happen.
What is the smallest Pump.fun session?
A target volume of 100 SOL, which costs 1 SOL at the flat 1% fee.
Start a session on this launchpad
Paste the contract address, set wallets and volume, and see the exact fee before paying. Flat 1% of target volume from 100 SOL, no wallet connection.
We run the SolanaVolumeBot console and keep these launchpad pages in line with how each venue works today. Spotted something out of date? Write to support@solanavolumebot.us.